When you go shopping, you will discover there have varies belts hanged on the belt hangers. So many different belts, have you ever thought how a belt born? Here I introduce you how to make a belt.

1. Leather optional

A good leather, the feel and texture of the finished belt, is to identify the most important part of the grade, not too loose, not too hard. Second, do the belt on the entire skin material size, shape demanding to avoid defects leather, in order to reduce the loss rate, thereby reducing costs. The leather on the market ranging from 5 / feet - 50 / feet. You will discover, normally for those real leather belts, they all hanged well on the shop with the belt hangers. For the fake leather, its may just hanged on a metal bar.

2. Cutting the leather

Before making the belt, we need to cut the big material into small pieces.

3. Make the leather thinner

4 Lamination the oil

The belt have three layer, before make them into one layer, we should lamination the oil on each layer first.

5. Tape

With the oil layer, we then could tape three layers into one layer

6. Fix position

Extrusion, rubber wheel on the use of stereotypes machine with body effect to consolidate fit; plays a decisive role in this step of the whole band itself radians and with type beautiful.

7. Polish the edge

On the belt to be cut and polished, so that the cross-section of the leather smooth lint.

8. Oil the edge

The edge is not beautiful, we should oil the edge

9. Make the edge oil clean

Side of the oil dry, more or less gets on the skin of the dough and the bottom of the belt need manpower to clean each belt, carefully wipe with a sponge and fine brush, very time-consuming, but can also cause great loss.

10 stitch the belt

Master operation, the need for experience and make sure that they flat alignment, not jumpers can not afford beans, thread stitching neat.

11 perforated, deboss the logo

12. Packed the belt. Or hanged the belts on the belt hangers.