Tel:
86-27-83372627
86-27-83372628
86-27-83372629
Fax:
86-27-83372625
E-mail:
info@sinicline.net
The Types of PSA Sticker Labels |
|
| Release time:2013-10-07 Source:admin Reads: | |
| Pressure sensitive sticker labels are commonly made from water based acrylic adhesives, with a smaller volume made using solvent based adhesives and hotmelt adhesives. The most common adhesive types are: Permanent – Typically not designed to be removed without tearing the stock, damaging the surface, or using solvents. The adhesion strength and speed can also be varied. For example, full adhesion can be nearly instant, or the label can be almost removable for a short period with full adhesion developing in minutes or hours (known as respositionable sticker labels). Peelable – Adhesion is fairly strong and will not fall off in normal circumstances, but the label can be removed relatively easily without tearing the base stock or leaving adhesive behind on the old surface. The adhesive is usually strong enough to be applied again elsewhere. This type is frequently known as 'removable'. There are many different types of removable adhesives, some are almost permanent, some are almost 'ultra peelable'. Ultra-peelable – Designed principally for use on book covers and glass, when removed these sticker labels do not leave any residue whatsoever. Adhesion is weak and only suitable for light duty applications. Normally these labels have very little adhesion to anything once they've been removed. Freezer or Frost fix – Most permanent and peelable adhesives have a service temperature limit of -10 degrees Celsius, whereas freezer (otherwise known as frost fix) adhesives have a service temperature -40 degrees Celsius and are suitable for deep freeze use. High Tack – A type of permanent adhesive that exhibits a high initial grab to the application surfaces, and is commonly used at higher coat weights to enable labels to adhere strongly to difficult, rough or dirty surfaces. Static Cling – This is not actually an adhesive at all. The material (usually PVA) has a static charge to enable its adhesion to flat, smooth surfaces such as glass. It is not sticky as such and is commonly used for window advertising, window decorations, oil change labels, etc. |
